• 工厂地址
    中国,河南,新乡
  • 联系电话
    13063679988

SGS面料测试翻译

The following sample(s) was/were submitted and identified on behalf of the client as:

下列样品已提交,并代表客户确认为:

Official Report

官方报告

Sample Description As Declared :

样品描述声明:

No. Of Sample : One

样品数量:一个

Colour : Dino (aop) (print/pigment)

颜色:小恐龙(活性印花)

Fibre Content : 100% cotton printed flannel brushed

纤维组份:100%全棉磨毛印花

Material : Woven flannelette fabric

材料:梭织法兰绒面料

Fabric Weight : 165.00g/m2

克重:165.00g/m2

Yarn Count : 48X42/20X10

纱支:48X42/20X10

Construction : 100% cotton printed flannel brushed

组成:100%全棉磨毛(起绒)印花法兰绒

Finishing/Special – Claim :

完成/特殊要求:

Trim : No

装饰:无

Trim Category : –

修剪类别:—

End Uses : Sleepwear

终端用途:睡衣

Garment Type/Garment Fit :

服装款式/服装合体性:

Night dress (fitted/regular)

夜礼服睡衣(合身的/普通的)

Garment Length : >60cm

服装长度:大于60cm

Style No. :

款号:

Order No. : –

订单号:

Season : W-18

季节:W-18(W代表冬季)

Testing Stage : Pre-production (shell fabric)

测试阶段:预生产(面料)

Testing Required : Full test

测试需求:全测试

Manufacturer’s Name : 制造商名字

Buyer’s Name : 采购商名字

Standard : xxx Apparel Standard

标准:测试标准

Retest : –

Ref. : Specify previous fiber content test report is BGDT17088530

复试:—

参考文献:指定前纤维含量测试报告bgdt17088530

Applicant’s Provided Care Instruction/Label :

申请人提供的洗涤标签:

Turn garment inside out, wash before wear, warm machine wash with similar colours, do not bleach, do not tumble dry, warm iron on reverse side if required, do not dry clean

把衣服翻出来,穿之前要洗,和类似的颜色一起机洗,不要漂白,不要烘干,必要时在反面烫熨斗,不要干洗。

This is care instruction description

这是洗涤描述

(Remarks: Care instruction provided by applicant)

(备注:这是申请人提供的洗涤备注)

Sample Receiving Date : Nov 17, 2017

样品接受时间: Nov 17, 2017

Test Performing Period : Nov 17, 2017 – Nov 21, 2017

样品测试执行阶段: Nov 17, 2017 – Nov 21, 2017

Test Results : For further details please refer to the following page(s).

测试结果:更多细节参照以下页面

Conclusion:

总结

Dimensional Stability To Washing(Before iron) :F

洗前尺寸稳定性(熨烫前):未通过

Dimensional Stability To Washing(After iron) :F

洗前尺寸稳定性(熨烫后):未通过

Colour Fastness To Washing :M

水洗色牢度:通过

Colour Fastness To Water:M

水渍洗色牢度:通过

Colour Fastness To Rubbing: M

摩擦色牢度:通过

Print Durability: F

印花耐久性:通过

Tearing Strength :M

撕裂强度:通过

Seam Slippage :F

接缝滑移:未通过

Fabric Weight Per Unit Area: F

面料克重:未通过

Remark: M = Meet K-M Requirement F = Below K-M Requirement

备注:M代表符合xx客户要求,F代表达不到xx客户要求


Test Results

测试结果

Requirement

要求

Dimensional Stability To Washing

水洗尺寸稳定性

(AS 2001.5.4-2005:Wash program No. 5A, Using front load, horizontal drum type machine wash at 40 degree C with 2kg total dry mass(knitted polyester ballast+ specimen) and 77% ‘ECE’ (A) detergent+ 3% TAED+ 20% Sodium perborate, normal cycle, line dry, warm iron on reverse, wash inside out.)

Colour Fastness To Rubbing

摩擦色牢度

(AS 2001.4.3-1995; Size of rubbing finger: 16mm diameter.)

Dry staining 4-5 Min. 3-4

干变色

Wet staining 2 Min. 2

湿变色

Remark: Grey Scale rating is based on the 5-step scale of 1 to 5, where 1 is bad and 5 is good

备注:灰度等级是基于1到5的5个尺度,其中1和5是好是坏

Print Durability

印花稳定性

(In House-Method; Washing procedure: Same as shrinkage.)

After 3 washes

Observation on washed sample Satisfactory

1. Colour change : Grade 2-3 on print Color change : Min.3-4 Negligible cracking and

peeling

2. Cross staining : Grade 5

3. Appearance of print/fabric

: Considerably frosting of prints

General appearance of washed sample is unsatisfactory due to point 1,3

Remarks: Grey Scale Rating is based on the 5-step scale of 1 to 5, where 1 is bad and 5 is good.